Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.
![](https://msp.images.akzonobel.com/prd/dh/asgdlx/packshots/47eb4e57d8d13436716c82e44fb52ca3.png)
Hammerite Direct to Galvanised Metal Paint
-
Finish Smooth Gloss
-
Coverage Up to 8 m2/L for one coat at recommended dry film thickness (brushing).
-
Drying Time 4 hours touch dry, 6 hours - recoatable
-
Coats 1
-
3 in 1 Paint- Primer undercoat and topcoat all in one can
-
Up to 5x better anti-rust protection compared to regular metal paints
-
DUALTECH technology provides two-way protection
-
Quick Drying enables quick recoat
-
Resists dirt pick up
Product Description
Application Description
• Stir before use
• One coat will normally be sufficient but additional coats
may be required when applying over contrasting colours
• Ensure edges and corners are adequately coated
ROLLER - Suitable for larger, flat areas.
• Hammerite Direct To Galvanised Metal Paint is designed to be ready for use
• The edges should be brushed in first and the remaining areas quickly filled in with the roller
• For best results apply liberally using short, quick strokes
Health & Safety
Tips & Advice
-
1. CleaningClean all equipment with Hammerite Thinner & Brush cleaner after use.
-
2. StoringObserve the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
![](/content/dam/akzonobel-common/common-assets/paint-calculator-instructions.png)
![](https://msp.images.akzonobel.com/prd/dh/asgdlx/packshots/47eb4e57d8d13436716c82e44fb52ca3.png)
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
![](https://msp.images.akzonobel.com/prd/dh/asgdlx/packshots/47eb4e57d8d13436716c82e44fb52ca3.png)
Hammerite Direct to Galvanised Metal Paint